miticoalex ha scritto:Non aspettarti miracoli, ma puoi provare con TCP optimizer.
Se hai vista o seven, il programma va lanciato come amministratore(click destro, esegui come..........)
Leggi
qui. Ricorda che questro programma, consente non solo di ripristinare ai valori di default, ma ti permette anche di effettuare un backup delle impostazioni correnti.
Fammi sapere.
non riesco a modificare il parametro rwin:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default TCP Receive Window (RWIN) = 65700
RWIN Scaling (RFC1323) = 2 bits (scale factor: 2^2=4)
Unscaled TCP Receive Window = 16425
In Windows 7, unless "TCP/IP Auto-Tuning" is disabled, only the Current TCP Window is displayed. Use the latest TCP Optimizer for tweaking.
RWIN is not fully optimized. The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP 1323 Options. You might want to use one of the recommended RWIN values below.
RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
64240 (up to 2 Mbit lines, depending on latency. MSS * 44)
128480 (1-5 Mbit lines, depending on latency. MSS * 44 * 2)
256960 (2-14 Mbit lines, depending on latency. MSS * 44 * 2^2)
513920 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3)
1027840 (25-60 Mbit lines depending on latency. MSS * 44 * 2^4)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 2628 kbps (329 KBytes/s) @ 200ms
Your TCP Window limits you to: 1051 kbps (131 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 47 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
