Aiutamici Forum
Benvenuto Ospite Cerca | Topic Attivi | Utenti | | Log In | Registra

Parere alimentatore Opzioni
michelin2
Inviato: Tuesday, January 26, 2016 4:24:24 PM
Rank: Member

Iscritto dal : 3/26/2014
Posts: 28
Salve, da qualche giorno ho dei problemi all'accensione del pc.
Delle volte quando premo il tasto di accensione vedo la luce
dell'hd accesa fissa e lo schermo resta buio.
Altre volte quando si accende mi appare messaggio di errore differente.
Certe volte: "Overclocking failed! Please enter setup to re-config your system.
Press F1 to run setup (e va nel bios)
Press F2 to load default valves and continue".

Altre volte: "Usb device over current status detected!!
system will shut down after 15 seconds".

Altre volte: "CMOS checksum bad: press F1 to run setup press F2 to load default".

Premetto che ho già sostituito la batteria.

Leggendo sul forum ho letto che potrebbe essere l'alimentatore.
Ho aperto l'alimentatore ho visto questa specie di colla su alcuni condensatori.

Riporto i link delle immagini:

http://it.tinypic.com/r/vet6rl/9

http://it.tinypic.com/r/9hnwj7/9

Se si trattasse dell'alimentatore, quale potrei prendere?

Grazie anticipatamente!!!
Sponsor
Inviato: Tuesday, January 26, 2016 4:24:24 PM

 
bobo779256
Inviato: Tuesday, January 26, 2016 5:27:34 PM

Rank: AiutAmico

Iscritto dal : 4/8/2011
Posts: 4,080
Servono più informazioni per poter dare una risposta

Usa Speccy, anche portable, una volta aperto vai sul menu File\Salva come file di testo, e copia\incolla qui dal txt creato la prima parte dal titolo Riepilogo

Il sistema è overcloccato? Prova a tornare alle impostazioni standard.

Aspettiamo comunque le info
miticoalex
Inviato: Tuesday, January 26, 2016 6:42:54 PM

Rank: AiutAmico

Iscritto dal : 10/19/2010
Posts: 14,635
michelin2 ha scritto:
Leggendo sul forum ho letto che potrebbe essere l'alimentatore.
Ho aperto l'alimentatore ho visto questa specie di colla su alcuni condensatori.

Riporto i link delle immagini:

http://it.tinypic.com/r/vet6rl/9

http://it.tinypic.com/r/9hnwj7/9


Salve! Più della colla, mi preoccuperei del gonfiore di taluni condensatori.



michelin2
Inviato: Tuesday, January 26, 2016 8:32:54 PM
Rank: Member

Iscritto dal : 3/26/2014
Posts: 28
Grazie delle risposte!
Questo è il log file di Speccy:

Operating System
Windows 8.1 Pro 32-bit
CPU
AMD Opteron 180 (UP) 27 °C
Denmark 90nm Technology
RAM
4,00GB Dual-Channel DDR @ 160MHz (3-3-3-8)
Motherboard
ASUSTeK Computer Inc. A8V Deluxe (Socket 939) 21 °C
Graphics
SyncMaster (1024x768@64Hz)
ATI RADEON 9200 Series (C.P. Technology)
Storage
465GB Promise 1+0 Stripe/RAID0 SCSI Disk Device (SCSI)
Optical Drives
PHILIPS PCDV5016L2 ATA Device
TSSTcorp CD-R/RW TS-H292A ATA Device
Audio
Realtek AC'97 Audio for VIA Audio Controller


Questi altri dati:

RAM
Memory slots
Total memory slots 2
Used memory slots 4
Free memory slots 4294967294
Memory
Type DDR
Size 4096 MBytes
Channels # Dual
DRAM Frequency 160.2 MHz
CAS# Latency (CL) 3 clocks
RAS# to CAS# Delay (tRCD) 3 clocks
RAS# Precharge (tRP) 3 clocks
Cycle Time (tRAS) 8 clocks
Bank Cycle Time (tRC) 11 clocks
Command Rate (CR) 2T
Physical Memory
Memory Usage 32 %
Total Physical 3.25 GB
Available Physical 2.20 GB
Total Virtual 3.81 GB
Available Virtual 2.79 GB
SPD
Number Of SPD Modules 4
Slot #1
Type DDR
Size 1024 MBytes
Manufacturer Kingston
Max Bandwidth PC3200 (200 MHz)
Part Number K
Serial Number 1849579030
Week/year 05 / 09
Timing table
JEDEC #1
Frequency 166.7 MHz
CAS# Latency 2,5
RAS# To CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2,500 V
JEDEC #2
Frequency 200.0 MHz
CAS# Latency 3,0
RAS# To CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2,500 V
Slot #2
Type DDR
Size 1024 MBytes
Manufacturer Kingston
Max Bandwidth PC3200 (200 MHz)
Part Number K
Serial Number 1816059669
Week/year 05 / 09
Timing table
JEDEC #1
Frequency 166.7 MHz
CAS# Latency 2,5
RAS# To CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2,500 V
JEDEC #2
Frequency 200.0 MHz
CAS# Latency 3,0
RAS# To CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2,500 V
Slot #3
Type DDR
Size 1024 MBytes
Manufacturer Kingston
Max Bandwidth PC3200 (200 MHz)
Part Number K
Serial Number 1830540857
Week/year 03 / 09
Timing table
JEDEC #1
Frequency 166.7 MHz
CAS# Latency 2,5
RAS# To CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2,500 V
JEDEC #2
Frequency 200.0 MHz
CAS# Latency 3,0
RAS# To CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2,500 V
Slot #4
Type DDR
Size 1024 MBytes
Manufacturer Kingston
Max Bandwidth PC3200 (200 MHz)
Part Number K
Serial Number 1864060218
Week/year 03 / 09
Timing table
JEDEC #1
Frequency 166.7 MHz
CAS# Latency 2,5
RAS# To CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2,500 V
JEDEC #2
Frequency 200.0 MHz
CAS# Latency 3,0
RAS# To CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2,500 V
Motherboard
Manufacturer ASUSTeK Computer Inc.
Model A8V Deluxe (Socket 939)
Version Rev 1.xx
Chipset Vendor VIA
Chipset Model K8T800 Pro
Chipset Revision 00
Southbridge Vendor VIA
Southbridge Model VT8237
Southbridge Revision 00
System Temperature 21 °C
BIOS
Brand American Megatrends Inc.
Version 1018.002
Date 16/08/2007
Voltage
CPU VCore 1.392 V
MEMORY CONTROLLER 2.928 V
+3.3V 3.312 V
+5V 5.120 V
VIN2 0.288 V
VIN3 3.056 V
PCI Data
Slot AGP 8X
Slot Type AGP 8X
Slot Usage In Use
Bus Width 32 bit
Slot Designation AGP
Characteristics 3.3V, Shared, PME
Slot Number 0
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI1
Characteristics 3.3V, Shared, PME
Slot Number 1
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI2
Characteristics 3.3V, Shared, PME
Slot Number 2
Slot PCI
Slot Type PCI
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCI3
Characteristics 3.3V, Shared, PME
Slot Number 3
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI4
Characteristics 3.3V, Shared, PME
Slot Number 4
Slot PCI
Slot Type PCI
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCI5
Characteristics 3.3V, Shared, PME
Slot Number 5
Graphics
Monitor
Name SyncMaster on Microsoft Basic Display Driver
Current Resolution 1024x768 pixels
Work Resolution 1024x728 pixels
State Enabled, Primary
Monitor Width 1024
Monitor Height 768
Monitor BPP 32 bits per pixel
Monitor Frequency 64 Hz
Device \\.\DISPLAY1\Monitor0
ATI RADEON 9200 Series
Manufacturer ATI
Model RADEON 9200 Series
GPU M9
Device ID 1002-5C63
Revision 2
Subvendor C.P. Technology (148C)
Current Performance Level Level 0
Transistors 30 M
Release Date 2002
DirectX Support 8.1
DirectX Shader Model 1.4
OpenGL Support 1.4
Bios Core Clock 240,00
Bios Mem Clock 196,00
ROPs 4
Shaders Vertex 4/Pixel 41
Memory Type DDR
Count of performance levels : 1
Level 1 - "Perf Level 0"
Storage
Hard drives
Promise 1+0 Stripe/RAID0 SCSI Disk Device
Interface SCSI
Capacity 465 GB
Real size 500.107.771.904 bytes
RAID Type None
S.M.A.R.T
S.M.A.R.T not supported
Partition 0
Partition ID Disk #0, Partition #0
File System NTFS
Volume Serial Number C45B80CE
Size 349 MB
Used Space 253 MB (72%)
Free Space 96 MB (28%)
Partition 1
Partition ID Disk #0, Partition #1
Disk Letter C:
File System NTFS
Volume Serial Number 5077B450
Size 243 GB
Used Space 57 GB (23%)
Free Space 186 GB (77%)
Partition 2
Partition ID Disk #0, Partition #2
Disk Letter F:
File System NTFS
Volume Serial Number 12EFE104
Size 221 GB
Used Space 806 MB (0%)
Free Space 220 GB (100%)
[/size][/size]


Per miticoalex, potrebbero essere i condensatori dell'alimentatore?
Se dovessi scegliere un alimentatore, quale potrei prendere? Grazie
bobo779256
Inviato: Tuesday, January 26, 2016 10:12:42 PM

Rank: AiutAmico

Iscritto dal : 4/8/2011
Posts: 4,080
Con quel tipo di scheda madre è consigliato un alimentatore minimo da 350 W, io abbonderei un pelo e ne metterei uno da almeno 500 W

Per il modello, quello che hai su è di bassa qualità, con una spesa dai 30 ai 60 €uri ti prendi un alimentatore di discreta qualità

Solo come esempio, visto che ne trovi a chili dappertutto, vedi questo link

L'unica cosa che ti consiglio è controllare bene le dimensioni (anche se mi sembra quello che hai sia standard), che la ventola dell'alimentatore sia da 12 cm (meno rumore) e che sia posizionata giusta in base a quella dell'alimentatore che hai su ora; i modelli 80+ sia bronze che silver hanno una qualità maggiore
miticoalex
Inviato: Wednesday, January 27, 2016 12:00:35 AM

Rank: AiutAmico

Iscritto dal : 10/19/2010
Posts: 14,635
michelin2 ha scritto:
Per miticoalex, potrebbero essere i condensatori dell'alimentatore?


Sì. Ovviamente conviene se li cambi tu, altrimenti forse ti conviene acquistare un nuovo alimentatore.







michelin2
Inviato: Friday, February 12, 2016 8:17:23 PM
Rank: Member

Iscritto dal : 3/26/2014
Posts: 28
Grazie ragazzi!!! Ho sostituito l'alimentatore come mi avete consigliato. Ne ho preso uno da 550 W e adesso parte normalmente. Grazie tante del vostro aiuto, credo di aver risolto (almeno fino ad oggi!!!).
Utenti presenti in questo topic
Guest


Salta al Forum
Aggiunta nuovi Topic disabilitata in questo forum.
Risposte disabilitate in questo forum.
Eliminazione tuoi Post disabilitata in questo forum.
Modifica dei tuoi post disabilitata in questo forum.
Creazione Sondaggi disabilitata in questo forum.
Voto ai sondaggi disabilitato in questo forum.

Main Forum RSS : RSS

Aiutamici Theme
Powered by Yet Another Forum.net versione 1.9.1.8 (NET v2.0) - 3/29/2008
Copyright © 2003-2008 Yet Another Forum.net. All rights reserved.