Rank: Member
Iscritto dal : 10/10/2005
Posts: 0
|
ho provato a masterizz. un dvd rw +- con nero 6 quando inizia la scrittura mi dice che il disco non è vuoto !!!! provo a cancellarlo ma niente mi da errore! sia su dvd vergine che nuovo nessun problema con cdr\rw dvdr !!!!!!!! ps provato anche con nero 7,niente anche se tento di formattarlo incd
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Versione Nero: 6.6.0.0 (Nero Express)
Masterizzatore: (DVDRW DRW-3S165) Versione: CSG1 - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: (atapi) HA 1
Drive buffer : 2048kB
Bus Type : default (0) -) ATAPI, detected: ATAPI
CD-ROM: (DVDRW DRW-3S165 )Versione: CSG1 - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: (atapi) HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW DRW-3S165 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVDRW DRW-3S165 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 235MB (240984kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.7.2006
Compilation ISO
16.46.28 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16.46.28 #2 Text 0 File Reader.cpp, Line 127
Reader running
16.46.28 #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-3S165 running
16.46.28 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
16.46.28 #5 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
16.46.44 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 368999 ( 81:59.74, 720MB), real: 4194303MB
Last address to be written: 607 ( 0:08.07, 1MB)
16.46.44 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: YES (enabled: CD)
16.46.44 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: DVDRW DRW-3S165, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
16.46.44 #9 Text 0 File DlgWaitCD.cpp, Line 430
))) Protocol of DlgWaitCD activities: (((
=========================================
Not enough free discspace.
(Medium in drive: DVD-RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)
16.46.44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [DVDRW DRW-3S165]
--------------------------------------------------------------
16.46.45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [DVDRW DRW-3S165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
608 | lead-out | 1 | 0x00 | 0x41
16.46.45 #12 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file
16.46.45 #13 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
16.46.45 #14 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata
16.46.45 #15 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 2x (2.770 KB/s)
16.46.45 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16.46.45 #17 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:50,363 (50363ms) -> OK
16.46.45 #18 Text 0 File DVDMinusRW.cpp, Line 271
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
16.46.45 #19 Phase 136 File dlgbrnst.cpp, Line 1861
Formattazione Veloce DVD-RW
16.48.52 #20 Phase 65 File dlgbrnst.cpp, Line 1861
Inizio scrittura
16.48.52 #21 Text 0 File DVDR.cpp, Line 1955
Recording mode: Restricted Overwrite Mode
16.48.52 #22 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Buffer underrun protection -> ON , Generic write control : ON
16.48.52 #23 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes
16.48.52 #24 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: (not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2FFFF h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16.48.52 #25 SCSI -1047 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07870000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00
16.48.52 #26 CDR -1047 File Writer.cpp, Line 311
Modo non valido per questa traccia
16.48.52 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
16.48.52 #28 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was -1
16.48.52 #29 Phase 133 File dlgbrnst.cpp, Line 1861
Scrittura Lead-Out breve
16.49.47 #30 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
16.49.47 #31 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
16.49.47 #32 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 2x (2.770 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 01/06/2005 0.36.02 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 4, size=92928 bytes, created 07/09/2004 14.41.06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 4, size=28672 bytes, created 07/09/2004 14.41.22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 4, size=7680 bytes, created 07/09/2004 14.42.54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 19/08/2004 14.00.00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ERRORE CON INCD DICE CHE IL DISCO NON è COMPATIBILE CON IL DRIVE O è DANNEGIATO ANCHE DISCO NUOVO AIUTOOOOOOOOOO !!!!!!!!!!!!!!!!!!!!! GRAZIE
|
Rank: Admin
Iscritto dal : 10/4/2000
Posts: 19,056
|
I dischi RW devono essere formattati prima dell'utilizzo con il programma installato, perché ogni tipo di programma utilizza una sua particolare procedura, dopo la formattazione si deve utilizzare lo stesso programma, per Nero si tratta di INCD per riconoscere e scrivere sul disco che si comporterà come una qualsiasi unità disco fisso. Prova a disinstalare Nero, eliminare la cartella restante in C:\Programmi, riavvia il computer e reinstallalo nuovamente, compreso INCD, la cui icona deve comparire nella barra applicazioni vicino all'orologio. Se nero che utilizzi è una versione di prova, forse è scaduto il periodo di prova gratuita.
alfonso_aiutamici@hotmail.it
|